The Touchless Cover ™ Warranty and Disclaimer
IMT, Inc. (hereinafter “IMT”), warrants the original purchaser that The Touchless Cover™ will be free from defects and workmanship as set forth below: This warranty is valid only if the boat cover has been used, adapted, and/or installed in accordance with our measurement, installation and safe-operating instructions. Some components and materials come with manufacturer guarantees that are separate from this warranty. IMT’s warranty does not supersede such guarantees, nor does it create component or material guarantees that are not otherwise offered by their manufacturers.
WHAT IS COVERED BY THIS WARRANTY: This warranty is limited to replacement parts and exchanges only, at IMT’s option, and does not warrant the cost of removing, packaging, re-installing, return shipping, or any other costs of material or labor. Further, the customer is responsible for all shipping costs.
Workmanship and components are covered by a one (1) year limited warranty for defective component parts or material failure due to a fault in workmanship.
Our cover fabrics have a five (5) year limited warranty which warrants against loss of color or strength under normal exposure conditions, and does not cover labor and installation performed by the dealer.
Motors come with a five (5) year warranty which warrants motors free from defects in material and workmanship under normal and proper use for a period of five (5) years starting from the date of delivery.
WHAT IS NOT COVERED UNDER THIS WARRANTY: Incorrect measurements, installation, and/or operation: Warranty applies only if the cover systems have been measured/ installed/operated in accordance with our measurement, installation and operating instructions. If you have any questions, please call or e-mail before installing or measuring for your cover.
Warranty does not cover any other damage or material failure resulting from system use, non-use or from system installation.
This limited warranty does not cover any other damage or material failure resulting from, but not limited to, oxidation; permitting the product to come in contact with tree sap, chemicals or other liquids other than water; accidental damage or intentional damage; failure to properly secure cover; permitting sharp objects to come into contact with cover; windblown objects; acts of God or nature, including, but not limited to: hurricanes, gales, tornadoes, snow, sleet, heavy rain, heavy winds, hail, flooding, weights or loads allowed to accumulate on the cover; fire or similar hazards, vandalism, neglect, improper use or care, or a combination of the foregoing, or dents, scratches or weathering occurring from normal use, wear and tear; chemical pollutants; mildew; structural defects; negligent maintenance or misuse or abuse, or any other causes or occurrences beyond the control of IMT, Inc.
HOW TO OBTAIN WARRANTY SERVICE YOU MUST NOTIFY IMT WITHIN FIFTEEN (15) DAYS OF DISCOVERY OF THE ALLEGED DEFECT BY CALLING 407-679-2217 or Toll-free: 877-679-2217, and PRIOR AUTHORIZATION IS REQUIRED. Transportation charges are the responsibility of the customer. C.O.D. or collect shipments will not be accepted. A photocopy of proof of purchase sales receipt or invoice is required.
Any expresses or implied warranty not provided herein, including without implied limitation, any warranties of merchantability or fitness for a particular purpose, and any remedy for breach of contract, which but for this provision might arise by implication of operation law, are hereby excluded and disclaimed. If they cannot be disclaimed, any implied warranties of merchantability and of fitness for any particular purpose are expressly limited to a term of one (1) year. Some states do not allow limitations on how long an implied warranty last, so the above limitation may not apply to you. Under no circumstances shall IMT. be liable to purchaser or any other person for any special, incidental, or consequential damages, whether arising out of breach of warranty, breach of contract, tort or otherwise. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Notwithstanding anything to the contrary herein, this limited warranty is limited to repair or replacement and if such warranty fails because attempts at repair are not completed within a reasonable time, or it fails for any other reason, any damages are limited to the lesser of either the cost of needed repairs or reduction in the market value of the cover caused by lack of repairs, in any case.
The manufacturer neither assumes nor authorizes any other person to give any other warranty or to assume on its behalf any other obligation or liability. This warranty is non-transferable from original owner.
PLEASE NOTE: IMT reserves the right to make changes in prices, colors, specifications, equipment, options, materials, design, and/ or discontinue models at any time (without notice) and shall be under no obligation to equip or modify any cover built prior to such changes .
6450 University Blvd, Ste 1, Winter Park, FL 32792 877-679-2217 Fax: 407-679-1114
1. DO keep shrubbery and vines away from your boat cover, as many bushes contain acids which can be harmful to the fabric.
2. DO keep your boat cover clean by simply brushing the cover with a clean household broom, rinse with water and let air dry.
3. DO secure your boat cover when severe weather is imminent. Severe weather may damage fabric or metal components.
4. DO lubricate pulleys with WD-40 periodically by spraying WD-40 on pulleys and shaft.
5. DO be sure boat is centered inside of the cover, from left to right, and front to back, before lowering the cover.
1. DO NOT USE DETERGENTS or harsh cleaners or scrub too vigorously with an abrasive cleaner when cleaning your boat cover! (See fabric cleaning instructions for your fabric included in your Touchless Boat Cover owner’s package)
2. DO NOT allow water to stand on the boat cover, which could result in pocketing and possible stretching.
3. DO NOT overlook small rips or tears. If a sharp object punctures the fabric, it should be repaired.
4. DO NOT permit leaves, twigs, dirt, etc. to remain on your boat cover, as they might cause staining, of the fabric, or allow mold or mildew to develop.
5. DO NOT lay anything on the top of your cover.
6. DO NOT leave cover raised in the “UP” position for extended periods of time.
7. DO NOT allow cover to come in contact with anything (boat, dock, etc.) when cover is in operation (going up or coming down).
TOP GUN MARINE FABRIC
CARE & CLEANING INSTRUCTIONS
Top Gun marine fabric is guaranteed for a five year period against excessive loss of color strength under normal exposure conditions.
Periodic cleaning with a solution of 4 ozs. of bleach and 2 ozs. of soap, NOT DETERGENTS, in one gallon of water is recommended to minimize accumulations of dirt and bird droppings, which can support surface mildew growth and cause
Treatment with Aqua-Tite® water repellent after cleaning may be required to restore the original level of water resistance.
INNOVATIVE MARINE TECHNOLOGIES, INC.
INNOVATIVE MARINE TECHNOLOGIES IS LOCATED AT: 6450 University Blvd., Suite 1, Winter Park, FL 32792